Table of Contents
Advertisement
Parameter
Iden Area
Snap Line
Shield Area
Step 3 Draw lines on the view interface.
Click Redraw to delete lines one by one.
Step 4 Click Confirm to save the drawn lines.
Step 5 Select Applicable Region from Russian-Speaking Region and Europe. System
restarts after changing the region and all the functions such as plate recognition, alarm
trigger and more apply to the selected area.
Step 6 Click Confirm to save the region change.
4.3.7 Vehicle Snapshot
Select ANPR Receive, and then snapshots will be displayed when vehicles pass.
4.3.8 Event List
Select ANPR Receive, and the event information will be displayed, including No., event types,
capture time, lanes, plates, vehicle color, speed, vehicle signs, and vehicle types.
Table 4-8 Line parameters description
Description
Click it, and draw the area range which needs to be detected.
The recognition area line is displayed as red box.
Draw the detection line which triggers video capture, it is as functional as the
line in traffic. It will trigger, and take snapshot when the vehicle crosses the
detection line.
Snap line is displayed as green line.
Set the area range which needs to be shielded. LPR is not implemented
within the shielded area. It supports setting max two shielded areas.
Area line is displayed as gray box.
24
User's Manual
Advertisement
Table of Contents
