Table of Contents
Advertisement
device information.
Select Setting > ITC > Device Test > Device Test.
Step 1
Step 2
Configure parameters.
Parameter
Barrier Opening, and Closing
Capture
Display Content
Voice Broadcast
Abnormal Config
Export Device Info
4.5.1.9.2 Capturing Commissioning
You can overlay recognition area box, snap line, filtering area box, vehicle box, and license plate box
on the snapshots to help check the effect of the capturing commissioning.
Step 1
Select Setting > ITC > Device Test > Capturing Commissioning.
Step 2
Select Overlay lines, and tracking info check box, and then select types as needed.
Figure 4-54 Device test
Table 4-23 Device test parameter description
Description
Click Open or Close to test the barrier.
Click Test to stimulate capture, and view the snapshot in Live
page.
Click Test, and view whether the LED screen displays as
configured.
Click Test to check whether the device plays sound normally.
Voice broadcast is available on select models.
Click Check, and system checks abnormality automatically.
Select device information as needed, and export in batches.
47
User's Manual
Advertisement
Table of Contents
