Connecting The Power Cord; Connecting The Network Cable - Dahua Technology ITC1652 Construction Manual

3.3.1 Connecting the Power Cord

DANGER
Cut off the power supply before connecting the cables.

Power supply: 220 VAC.

Connect live wire to L port, neutral wire to N port and grounding wire to PE port.

Press and hold the button of the corresponding slot with a small slotted screwdriver.
Insert the cable into the slot.
Remove the slotted screwdriver, and the installation is complete.

3.3.2 Connecting the Network Cable

Connect the network cable of the camera to 1of the 8 Ethernet ports. We recommend you

connect the network cable in sequence.
Connect the terminal to the switch through the G2 port.

7
Construction Guide