Table of Contents
Advertisement
Device initialization and IP setting can be finished with the "ConfigTool" or on web interface. For
more information, see the Web Operation Manual.
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay in the same network segment.
Plan usable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall prevail.
4.1 Initializing Device
Step 1
Double-click "ConfigTool.exe" to open the tool.
Step 2
Click
Click Search setting.
Step 3
Step 4
Enter the start IP address and end IP address of the network segment in which you want to
search devices, and then click OK.
All the devices found in the network segment are listed.
Select one or several devices in uninitialized status, and then click Initialize.
Step 5
Step 6
Select the devices that need initialization, and then click Initialize.
4
Network Configuration
.
Figure 4-1
Modify IP
22
Quick Start Guide
Advertisement
Table of Contents
