Delete Filter <1-8; Set Filter Default - Nortel BayStack 820 Installation And Reference Manual

Example
BayStack> add filter 1
enter filter name (Unspecified):
enter interface (Unspecified):
enter Source IP Address (any, (a)ny/(s)ingle/(r)ange/(n)etwork):
enter single ip_addr (Unspecified):
enter ip_addr1-ip_addr2 (Unspecified):
enter ip_net_addr/netmask (Unspecified):
enter Destination IP Address (any, (a)ny/(s)ingle/(r)ange/(n)etwork):
enter Source TCP/UDP Port(any, (a)ny/(s)ingle/(r)ange):
enter Destination TCP/UDP Port(any, (a)ny/(s)ingle/(r)ange):
delete filter <1-8>
Deletes the specified filter.
Example
BayStack> delete filter 1
+

set filter default

Sets the default action to be taken when an IP packet does not match any rule on
the specified interface. For more information, refer to
page
Example
BayStack> set filter default
enter interface (Unspecified): isp
enter default action (forward, forward/discard) :forward
206901-A
10-20.
Using the Command Line Interface
/* if "s" or "single" specified */
/* endif "single" */
/*if "r" or "range" specified */
/* endif "range" */
/* if "n" or "network" specified */
/* endif "network" */
on
+add filter <1-8>
10-21