Delete User <User_Name; Set User; Show User <User_Name - Nortel BayStack 820 Installation And Reference Manual

Installation and Reference for the BayStack 820 ISDN Router
delete user <user_name>
Deletes a dial-in user entry from the local user database.

+set user

Sets the bounds for dynamic assignment of IP addresses to dial-in users. When
you enter this command, you are prompted to enter the upper bound address
(which should be an even host number), and the lower bound address (which
should be an odd host number). The default upper bound is 192.168.xxx.254. The
default lower bound is
is not assigned automatically by the router to dial-in users and may be used for
manual configuration of a LAN device (unless used by another router elsewhere
on the LAN).
Example
BayStack> set user
enter upper bound address 192.168.168.(254):
enter lower bound address 192.168.168.(231):
show user <user_name>
This command displays the current local profile database
enter a user name, the current local profile database is displayed for the specified
user
Example 1
BayStack> show user
Dial-In Ip address range : 192.168.168.231 - 192.168.168.254
user name:
enable IP:
enable IPX:
user name:
enable IP:
enable IPX:
10-18
192.168.xxx.231.
(Example 2).
u2
Yes
Yes
u1
Yes
Yes
Any address lower than the lower bound
dial in from: Workstation
IP RIP: Disable
IPX RIP/SAP: Enable
dial in from: Workstation
IP RIP: Disable
IPX RIP/SAP: Enable
(Example 1). If you
206901-A