Set Voice Port [A | B] - Nortel BayStack 820 Installation And Reference Manual

Installation and Reference for the BayStack 820 ISDN Router

+set voice port [A | B]

Configures the parameters of the voice operations on the specified voice port.
Example 1
This example configures a voice port for a North American switch type. Note that
Directory Numbers are associated with voice ports for these types of switches,
which means that the selected Directory Number is preferred when placing an
outbound call. But if the number is in use, another Directory Number may be
used. Inbound calls to that number ring the device attached to this voice port.
BayStack> set voice port A
Enter extension number of this port (11):
Associate this port with (dn1, dn1/dn2):
Withhold Caller ID? (no, yes/no):
Disable call waiting? (no, yes/no):
Example 2
This example configures a voice port for any other switch type. Because
simultaneous calls are permitted for this switch type, the selected Directory
Number is always used for outbound calls (unless you specify the withhold
option). Inbound calls to that number ring the device attached to this voice port.
BayStack> set voice port A
Enter extension number of this port (11):
Ring phone for any incoming call? (yes, yes/no):
Include Directory number as Caller ID on outgoing call
(dn1, withhold/
5551111 [dn1]/
5552222 [dn2]) :
Disable call waiting? (no, yes/no):
10-72
206901-A