Clear Trap Manager <1-5; Enable|Disable} Trap; Set Community String Read <"String; Set Trap Manager <1-5> <Ipaddr - Nortel BayStack 820 Installation And Reference Manual

Table 10-18
Table 10-18.
Command
clear trap manager <1-5>

{enable|disable} trap

set community string read <"string">
set trap manager <1-5> <IPaddr>
show snmp statistics
show trap manager <1-5>
clear trap manager <1-5>
Clears the IP address for the specified trap manager. When an SNMP trap
condition is met, and if trap generation has been enabled, a trap message is
automatically sent out to each trap manager whose IP address has been defined.
You can define up to five trap managers.
{enable|disable} trap
Enables or disables trap message generation. When you disable trap message
generation, no SNMP trap messages are generated. When you enable it, any
SNMP traps will be sent to each defined trap manager.
set community string read <"string">
Sets the community string (up to 30 characters) used for authenticating SNMP
"get" and "getnext" requests. The community string is case-sensitive. The default
for the read community string is public.
set trap manager <1-5> <IPaddr>
Sets the IP address of the n
Example
BayStack>
206901-A
lists the SNMP commands.
SNMP Commands
th trap manager (n=1-5).
set trap manager 1 203.23.12.71
Using the Command Line Interface
Page
10-55
10-55
10-55
10-55
10-56
10-56
10-55