Show Arp Table - Nortel BayStack 820 Installation And Reference Manual
Isdn router
Hide thumbs
Also See for BayStack 820:
- Installation instructions manual (18 pages) ,
- Release note (6 pages)
Table of Contents
Advertisement
Installation and Reference for the BayStack 820 ISDN Router
Example 1
This example assigns IP addresses to the two sides of the PPP connection ppp2.
The IP address 204.71.220.153 is assigned to the local side of ppp2, while
204.71.220.151 is assigned to the remote side. Both IP addresses use the same
network mask, 255.255.255.0.
BayStack> set ip ppp2.23 204.71.220.153 255.255.255.0 204.71.220.151
Example 2
This example activates IP routing over the ISDN connection profile isdnprofile1.
When a connection is set up using profile isdnprofile1, unnumbered IP routing is
turned on.
BayStack> set ip isdnprofile1
show arp table
Displays the Address Resolution Protocol (ARP) cache table, which contains up
to 16 of the most recent MAC-to-IP-address mappings that have not been aged
out.
Example
BayStack> show arp table
110.0.0.1at 00:60:20:00:00:15 permanent
110.0.0.2at 00:40:33:3D:D5:DB
10-30
206901-A
Advertisement
Table of Contents
