Delete Ip Default Route; Delete Ip Route <Ipaddr> <Netmask; Delete Ip <Interface_Name; Delete Pat Entry <Public _Port - Nortel BayStack 820 Installation And Reference Manual

Installation and Reference for the BayStack 820 ISDN Router

delete ip default route

Deletes the default route from the IP routing table. When you delete the default
router, packets normally sent to the default router are discarded.
delete ip route <IPaddr> <netmask>
Deletes the static route for the specified IP address and network mask from the IP
routing table.
Example
BayStack>
delete ip <interface_name>
Deletes the IP protocol configuration from the specified interface. The
corresponding IP routing table entry for this IP address is also deleted.
delete pat entry <public _port_#>
Deletes the specified port mapping from the Network Address Translation table.

delete pat entry default

Deletes the default port mapping from the Network Address Translation table.
{enable | disable} spoofing <interface_name> [
Enables or disables IP "spoofing" over switched connection profiles.
Because ISDN charges are based on the connection time, a technique referred to
as IP "spoofing" is often used to limit or prevent unnecessary connection time.
You can spoof the connection by:
Allowing control packets to be sent only when the connection is already up
1.
and transmitting user data, or
Allowing control packets to be spoofed (faked) so that the packets do not add
2.
load to the WAN traffic.
10-26
delete ip route 204.71.220.153 255.255.0.0
iprip <1-60>
]
206901-A