Removing The Rear Hard Disk Backplane - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-137 Installing a 12-bay NVMe drive backplane
Step 6 Install front drives.
Step 7 Install fan modules. For details, see
Step 8 Install full-height full-length riser cards if they are required. For details, see
Removing the Riser
Step 9 Install the air duct. For details, see
Step 10 Install the chassis cover. For details, see
Step 11 Install the RH2288H V3. For details, see
Step 12 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 13 Power on the RH2288H V3. For details, see
----End

7.57 Removing the Rear Hard Disk Backplane

Remove the backplane of the rear disks.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Issue 46 (2022-12-28)
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety Instructions.
7 Replacing Parts
Module.
7.19
Duct.
Cover.
Server.
Server.
3.5
272