Installing A Dc Psu - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
----End

7.10.2 Installing a DC PSU

Install a DC PSU to replace the original one.
A DC PSU needs to be added to improve reliability when the RH2288H V3 is
configured with only one DC PSU.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the PSU to be replaced. For details, see
Step 3 Take the spare DC PSU out of its ESD bag.
Step 4 Push the spare DC PSU along the guide rails into a slot (for example, slot 1) until
you hear a sound.
The PSU latch snaps in so that the PSU does not move. See
Issue 46 (2022-12-28)
a. Open the plastic clip and place the power cable in the plastic clip. See (1)
in Figure 7-17. Then close the plastic clip. See (2) in
Figure 7-17 Connecting a power cable (secured with the PSU using a
plastic clip)
b. Open the lock of the plastic clip. See (3) a in
plastic clip towards the PSU socket to ensure that the plastic clip is close
to the connector of the power cable. See (3) b in
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure
1 Safety Instructions.
7.9.2 Removing a DC
Figure
7 Replacing Parts
Figure 7-17.
7-17. Slide the
7-17.
PSU.
7-18.
163