Logging In To The Ibmc Cli - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 9-5 Logging in to iBMC
Step 5 Enter the user name and password for logging in to the iBMC WebUI.
Step 6 Select This iBMC from the Domain drop-down list.
Step 7 Click Log In.
The Information page is displayed, showing the user name in the upper right
corner.
----End

9.3 Logging In to the iBMC CLI

You can log in to the iBMC CLI to manage devices. There are several login
methods. Choose a method based on your requirements.
To log in to the CLI through a network port, you must connect the network port
on the configuration terminal to the network port on the server by using a
network cable, and ensure that the IP addresses of the two network ports are on
the same network segment.
The following data is required for logging in to the iBMC CLI:
●
●
Issue 46 (2022-12-28)
NO TE
The user account will be locked if incorrect passwords are entered for five consecutive
times. The user account is automatically unlocked 5 minutes later.
IP address of the iBMC management network port
iBMC user name and password
The default iBMC user name is root, and the default password is Huawei12#
$.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
307