Huawei RH2288H V3 User Manual page 274

RH2288H V3 Server
User Guide
●
●
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the PCIe card from the mainboard. For details, see
PCIe Card from the
Step 8 Determine the position of the SD card to be removed. SD card 1 is above the SD
card board, and SD card 2 is below the SD card board, as shown in
Figure 7-127 SD card position
Issue 46 (2022-12-28)
If the server is configured with two SD cards and only one SD card needs to
be replaced, replace the SD card with the spare part (BOM: 06010304).
If the server is configured with two SD cards and both of them need to be
replaced, replace the SD cards and the SD card board with the spare part
(BOM: 02311JDV). If the original server OS is installed on an SD card, install
the OS on the newly installed SD card.
Server.
Mainboard.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7.21.2 Removing a
7 Replacing Parts
Server.
3.6
Cover.
Figure 7-127.
261