Removing A Drive - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-6 Locking the front bezel
----End

7.5 Removing a Drive

Remove a drive before replacing it with a new one.
You do not need to power off the server when removing a drive. If services are
running on the RH2288H V3, back up the data stored on the drive.
Before removing a drive, determine its location to prevent misoperations.
Otherwise, the RAID array will fail.
Table 7-1
the System Event Log (SEL).
Table 7-1 Mapping
Drive Position
Front drives
Issue 46 (2022-12-28)
NO TE
If a drive is frequently removed and installed at an interval of shorter than 30 seconds,
there are risks that the drive cannot be detected.
shows the mapping between the silkscreens of the drives and slot IDs in
Copyright © Huawei Technologies Co., Ltd.
Panel Silkscreen
0 to 7 (8 x 2.5-inch
drives)
0 to 7 (8 x 3.5-inch
drives)
7 Replacing Parts
Slot ID in SEL
disk0 to disk7
disk0 to disk7
154