Huawei RH2288H V3 User Manual page 251

RH2288H V3 Server
User Guide
Step 9 Install PSUs. For details, see
Step 10 Install the FlexIO card. For details, see
Step 11 Install the RAID controller card. For details, see
Controller
Step 12 Install the CPUs. For details, see
Step 13 Install the DIMMs. For details, see
Step 14 Connect all internal cables. For details, see
Step 15 Install the fan module brackets in the chassis. See
Figure 7-101 Installing fan module brackets
Step 16 Install the fan modules. For details, see
Step 17 Install the air duct. For details, see
Step 18 Install the riser cards. For details, see
Step 19 Install the supercapacitor if it is required. For details, see
Supercapacitor (Screw-in RAID Controller
Step 20 Install the chassis cover. For details, see
Step 21 Install the RH2288H V3. For details, see
Step 22 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 23 Power on the RH2288H V3. For details, see
Step 24 Burn the original SN into the new mainboard after replacement. For details, see
section "Modifying Electronic Labels" in the
Issue 46 (2022-12-28)
7.10 Installing a
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
PSU.
7.46 Installing a FlexIO
7.32 Installing a Screw-in RAID
7.40 Installing a CPU.
7.42 Installing a DIMM.
2.7 Internal
Figure
7.16 Installing a Fan
7.14 Installing the Air
7.20 Installing a Riser
Card).
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
SmartKit User Guide (for Engineers)
7 Replacing Parts
Card.
Cabling.
7-101.
Module.
Duct.
Card.
7.37 Installing the
Cover.
Server.
Server.
3.5
.
238