Removing A Satadom - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-121 Installing an LCD support
Step 11 Connect the cable between the LCD and the VGA port. See step (3) in
7-116.
Step 12 Install the fan support.
Step 13 Install the fan modules. For details, see
Step 14 Install the air duct. For details, see
Step 15 Install full-height full-length riser cards if they are required. For details, see
Installing a Riser
Step 16 Install the chassis cover. For details, see
Step 17 Install the RH2288H V3. For details, see
Step 18 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 19 Power on the RH2288H V3. For details, see
----End

7.49 Removing a SATADOM

Remove a SATADOM if it has failed.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Issue 46 (2022-12-28)
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety Instructions.
7 Replacing Parts
Figure
Module.
Duct.
7.20
Cover.
Server.
3.5
Server.
256