Checking The Rh2288H V3 - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Table 5-2
Table 5-2 Procedure for configuring the server
Step
Check the server.
Configure RAID.
Configure the BIOS.
Change the user password
for iBMC.
Install an OS.

5.3 Checking the RH2288H V3

Log in to the iBMC WebUI or CLI to check the health status of the RH2288H V3.
Ensure that its health status meets the environment requirements for software
installation.
Table 5-3
status. For details about the CLI, see
Table 5-3 Default information
Item
iBMC
manageme
nt network
port data
iBMC login
data
Issue 46 (2022-12-28)
describes the procedure for configuring the server.
Description
● Check the board versions.
● Check for and clear server alarms.
The RH2288H V3 supports the following RAID
controller cards: SR320 (LSI SAS2208), SR420 (LSI
SAS2208), SR120 (LSI SAS2308), SR130 (LSI
SAS3008), SR430C (1 GB/2 GB, LSI SAS3108),
SP435 (PM8060), and SR135 (PM8068).
Configure RAID for the server based on site
requirements.
Configure the server BIOS, including the boot
mode, network drive, PXE options of the FlexIO
card, and BIOS password.
Change the default password for iBMC.
For details, see
Guide
describes the default information for checking the RH2288H V3 health
Name Default Value
IP address ● IP address: 192.168.2.100
and subnet
● Subnet mask: 255.255.255.0
mask
User name ● User name: root
and
● Password: Huawei12#$
password
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the RH2288H V3
Huawei Server OS Installation
.
Huawei Rack Server iBMC User Guide
.
123