Removing A Flexio Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
● Only authorized engineers can download the ElabelTool plug-in package,
● If the original device SN is not burnt in the new mainboard, the iBMC and OS
Step 25 (Optional) To upgrade the firmware (iBMC, BIOS, and CPLD) of the mainboard
after replacement, see
and BIOS configuration files of the original mainboard are exported before the
mainboard is replaced, you can import the iBMC and BIOS configuration files
through the iBMC WebUI to restore configurations. However, the exported
configuration files do not contain password information. You need to manually
configure the password for the iBMC user. For details, see Import/Export in
Huawei Rack Server iBMC User Guide
that support export and import in the iBMC and BIOS configuration files exported
from the iBMC, see "Configuration File Description" in
User Guide
----End

7.45 Removing a FlexIO Card

Remove a FlexIO card if it has failed or needs to be replaced with a new model.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the I/O module above the FlexIO card. For details, see
PCIe
Step 8 Remove the cables from the FlexIO card.
Step 9 Use a Phillips screwdriver to loosen the screw on the FlexIO card. See (1) in
7-102.
Issue 46 (2022-12-28)
NO TICE
import it to SmartKit, and modify electronic labels.
cannot obtain the ESN. This may affect the running of some services or the
monitoring and management on the device.
FusionServer Pro Rack Server Upgrade Guide
.
NO TE
After the mainboard is replaced, the iBMC and BIOS configurations are restored to the
default settings of the new mainboard. You need to reconfigure the iBMC and BIOS
according to the actual situation. The default user name, password, and IP address of the
server are listed in 5.1 Default
Server.
Card.
Copyright © Huawei Technologies Co., Ltd.
. For details about the configuration items
Information.
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7 Replacing Parts
. If the iBMC
Huawei Rack Server iBMC
Server.
3.6
Cover.
7.21 Removing a
Figure
239