Huawei RH2288H V3 User Manual page 295

RH2288H V3 Server
User Guide
Figure 7-150 Installing the VGA board on a server with eight 3.5-inch hard disks
Step 5 Tighten the screws to secure the VGA board to the panel. See step (2) in
7-150.
Step 6 Connect cables to the VGA board.
Step 7 Push the panel into the server in the arrow direction. See step (3) in
Step 8 Tighten the screws on the server. See step (4) in
Step 9 Connect all cables between the VGA board and the DVD drive or LCD. For details,
see
Step 10 Install the fan module brackets in the chassis. See
Issue 46 (2022-12-28)
NO TE
If fan modules have been installed, remove them and the fan support before tightening the
screws.
2.7 Internal Cabling.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure
Figure 7-150.
Figure 7-151.
Figure
7-150.
282