Huawei RH2288H V3 User Manual page 312

RH2288H V3 Server
User Guide
An M.2 SSD riser card can be configured with two M.2 SATA SSD cards. The
replacement method is the same for the two M.2 SATA SSD cards.
This section uses the M.2 SATA SSD card corresponding to SATA1 port as an
example.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the M.2 SATA SSD card to be replaced. For details, see
M.2 SATA SSD
Step 3 Take the spare M.2 SATA SSD card out of its ESD bag.
Step 4 Insert the M.2 SATA SSD card into the M.2 SSD riser at a 20° to 30° angle and
press down it horizontally. See step (1) in
Figure 7-169 Installing an M.2 SATA SSD card
Step 5 Tighten the screw on the M.2 SATA SSD card. See step (2) in
Step 6 Install the M.2 SSD riser card.
●
●
Step 7 Connect the cable to the M.2 SSD riser card. For details, see
Cabling for an M.2 SSD Riser
Step 8 Install the chassis cover. For details, see
Step 9 Install the RH2288H V3. For details, see
Issue 46 (2022-12-28)
Card.
For details about how to install an M.2 SSD riser card on the mainboard, see
7.22.2 Installing a PCIe Card on the
For details about how to install an M.2 SSD riser card on a riser card, see
7.22.1 Installing a PCIe Card on the Riser
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Figure 7-169.
Mainboard.
Card.
Card.
7.12 Installing the Chassis
3.4 Installing the
7 Replacing Parts
7.67 Removing an
Figure 7-169.
2.7.1 Internal
Cover.
Server.
299