Removing An Sd Card Board - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
2.
Step 8 Install the chassis cover. For details, see
Step 9 Install the RH2288H V3. For details, see
Step 10 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 11 Power on the RH2288H V3. For details, see
Step 12 Check the SD card status.
●
●
----End

7.53 Removing an SD Card Board

Remove a SD card board before replacing it with a new one.
Issue 46 (2022-12-28)
Figure 7-132 Installing the SD card board
Tighten the two screws. See (2) in
Cables.
Log in to the iBMC WebUI, choose Information > System Info, select the
Other Devices tab, and check the SD card status. For details, see
Rack Server iBMC User Guide
If one of the two SD cards is replaced, view the iBMC event log information to
check whether the SD card rebuild is complete.
In the iBMC event log, "Data rebuild starts at SD card
server is powered on.
N indicates that the SD card rebuild is complete.
at SD card
If the SD card is in abnormal status, contact Huawei technical support.
Copyright © Huawei Technologies Co., Ltd.
Figure
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
.
N indicates the SD card slot number. "Data rebuild stops
7 Replacing Parts
7-132.
Server.
Server.
N " is logged after the
Cover.
3.5
Huawei
266