Huawei RH2288H V3 User Manual page 208

RH2288H V3 Server
User Guide
Step 6 Connect cables to the DVD drive. See step (3) in
Step 7 Install the fan module brackets in the chassis. See
Figure 7-53 Installing fan module brackets
Step 8 Install the fan modules. For details, see
Step 9 Install the air duct. For details, see
Step 10 Install the chassis cover. For details, see
Step 11 Install the RH2288H V3. For details, see
Step 12 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 13 Power on the RH2288H V3. For details, see
----End
With Eight 3.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the DVD drive to be replaced. For details, see
Drive.
Step 3 Take the spare DVD drive out of its ESD bag.
Step 4 Tighten two M2 flat-head screws using the Phillips screwdriver to secure the
plastic latch to the DVD drive. See step (1) in
Issue 46 (2022-12-28)
NO TE
If fan modules have been installed, remove them and the fan support before connecting
cables.
Cables.
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure
7.16 Installing a Fan
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
1 Safety Instructions.
7.25 Removing the DVD
Figure 7-54.
7 Replacing Parts
7-52.
7-53.
Module.
Duct.
Cover.
Server.
Server.
3.5
195