Removing An Sd Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-126 Installing a SATADOM
Step 6 Install the chassis cover. For details, see
Step 7 Install the RH2288H V3. For details, see
Step 8 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 9 Power on the RH2288H V3. For details, see
----End
Verification
1.
2.
3.

7.51 Removing an SD Card

Remove an SD card before replacing it with a new one.
Remove SD cards based on actual situation. Back up important data on the SD
card before replacing it.
●
Issue 46 (2022-12-28)
Cables.
Start the server. When the BIOS startup screen is displayed, press Delete to
start the BIOS Setup Utility.
Enter the BIOS password when prompted.
Choose Advanced > PCH SATA Configuration and press Enter.
Check the component information.
SATADOM 1 and SATADOM 2 correspond to Serial ATA Port 4 and Serial
ATA Port 5 respectively.
If the server is configured with only one SD card, replace the SD card board
with the spare part (BOM: 02311JDU). If the SD card is installed with the OS,
install the OS on the newly installed SD card.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
Cover.
3.5
Server.
260