RH2288H V3 Server
User Guide
●
Step 3 Insert the other end of the AC power cable into the AC power socket on the
cabinet. The AC power socket is located horizontally at the rear of the cabinet.
Select a jack on the power socket for connection.
Step 4 Bind the power cable to the cable trough using cable ties.
----End
Issue 46 (2022-12-28)
Figure 3-24 Connecting a power cable (secured with the PSU using a velcro
strap)
If the PSU has a plastic clip, perform the following steps to connect the power
cable:
a.
Open the plastic clip and place the power cable in the plastic clip. See
step (1) in
Figure
3-25.
Figure 3-25 Connecting a power cable (secured with the PSU using a
plastic clip)
b.
Open the lock of the plastic clip. See (3) a in
plastic clip towards the PSU socket to ensure that the plastic clip is close
to the connector of the power cable. See (3) b in
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the RH2288H V3
3-25. Then close the plastic clip. See step (2) in
Figure
3-25. Slide the
Figure
3-25.
Figure
105