Huawei RH2288H V3 User Manual page 171

RH2288H V3 Server
User Guide
Observe the PSU indicators to check the PSU operating status. For details about
the indicators, see
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 (Optional) If only one PSU is configured, power off the server. For details, see
Powering Off the
Step 4 Open the cable tie for the power cable.
●
●
Issue 46 (2022-12-28)
2.4 Indicators and
Server.
If the PSU has a velcro strap, undo the velcro strap. See (1) in
Then remove the power cable. See (2) in
Figure 7-10 Removing a power cable (secured with the PSU using a velcro
strap)
If the PSU has a plastic clip, perform the following steps to remove the power
cable:
a. Open the lock of the plastic clip. See (1) a in
plastic clip away from the PSU socket. See (1) b in
Copyright © Huawei Technologies Co., Ltd.
Buttons.
1 Safety Instructions.
Figure 7-10.
Figure
7 Replacing Parts
4.2
Figure 7-10.
7-11. Slide the
Figure 7-11.
158