RH2288H V3 Server
User Guide
Figure 3-21 Connecting a 56G IB cable (using an IB FlexIO card with two 56G
ports as an example)
Step 5 Check that the new cable is properly connected.
Power on the server. If the FlexIO card indicator is green, the cable is properly
connected.
Step 6 Bind the new optical cable.
Bind the new optical cable in the same way as existing optical cables. You can also
remove all cable ties and bind all of the optical cables again if necessary.
----End
3.5.5 Connecting a USB Device
Check that data has been copied to the USB device to be connected.
Procedure
Step 1 Locate the server to which the USB device is to be connected.
Step 2 Connect the USB storage device to a USB port on the server, as shown in
3-22.
Issue 46 (2022-12-28)
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the RH2288H V3
Figure
102