Huawei RH2288H V3 User Manual page 284

RH2288H V3 Server
User Guide
Figure 7-136 Installing a drive backplane
Step 5 Connect the cable of the front drive to the server. For details, see
Cabling.
To prevent the drive backplane from being damaged, observe the following points
when you connect a 12-bay NVMe PCIe SSD extender adapter to the Slimline
cables of the drive backplane:
● Install the cable connector vertically into the drive backplane port. See (1) in
● Connect the cables near the drive backplane first and then the cables at the
Issue 46 (2022-12-28)
NO TE
This procedure uses a backplane with twelve 3.5-inch drives as an example. The installation
method applies to other backplanes.
NO TE
If dual RAID controller cards are configured, the indicator of the rear drive module can be
configured only when the CPLD version of the front drive backplane is later than V1.08.
NO TICE
Figure 7-137.
other end to prevent the cables near the drive backplane from being stretched.
See (2) and (3) in Figure
Copyright © Huawei Technologies Co., Ltd.
7-137.
7 Replacing Parts
2.7 Internal
271