Huawei RH2288H V3 User Manual page 26

RH2288H V3 Server
User Guide
Figure 2-9 Rear panel of the RH2288H V3
1
3
5
7
9
11
13
15
FlexIO Cards
The RH2288H V3 supports the following models of FlexIO cards:
Issue 46 (2022-12-28)
PSU 1
Power socket for a PSU
Connection status indicator
Onboard PCIe slots
(numbered 4 and 5 from
left to right)
FlexIO card
USB 3.0 port
VGA port
PSU 2
NO TE
● Items 4 and 8 in Figure 2-9
inch drives (2.5-inch and 3.5-inch drives can be configured together).
● If the server is equipped with a front drive backplane connecting twelve 3.5-inch drives,
you can install a maximum of four 3.5-inch or 2.5-inch drives at the rear. Both items 8
and 4 in Figure 2-9
● If the server is equipped with a front drive backplane connecting twenty-five 2.5-inch
drives, you can install a maximum of three 3.5-inch or 2.5-inch drives at the rear. Item 8
in Figure 2-9 can be equipped with two drives, and item 4 can be equipped with only
one drive in the upper slot.
● If item 8 is equipped with two drives, the drives are numbered A0 and B0 from top to
bottom. If item 4 is equipped with two drives, the drives are numbered A1 and B1 from
top to bottom.
Copyright © Huawei Technologies Co., Ltd.
2 PSU indicator
4 I/O module 2 (providing slots 6 to 8
from top to bottom) or NVMe PCIe
SSD adapter (corresponding to CPU
2, providing slots 6 and 7 from top to
bottom)
6 Data transmission status indicator
8 I/O module 1 (providing slots 1 to 3
from top to bottom)
10 UID indicator
12 Management network port
14 Serial port
- -
can be equipped with riser cards, or rear 2.5-inch or 3.5-
can be equipped with two drives.
2 Overview
13