Huawei RH2288H V3 User Manual page 150

RH2288H V3 Server
User Guide
Procedure
Step 1 Log in to the iBMC WebUI over a network port. For details, see
the iBMC
Step 2 Choose Config > Security Enhance.
Step 3 Select Enable for Password Complexity Check.
The system will perform a password complexity check when a new password is
set.
Step 4 Choose Config > Local User, as shown in
Figure 5-16 Local User page
Step 5 Click
Step 6 Change the password as prompted.
●
●
Issue 46 (2022-12-28)
WebUI.
next to the user whose password needs to be changed.
When the password complexity check function is disabled, the password can
be empty or a string of any characters fewer than 20 characters.
When the password complexity check function is enabled, the password must
meet the following requirements:
– Must contain 8 to 20 characters.
– Must contain at least one space or one of the following special
characters:
`~!@#$%^&*()-_=+\|[{}];:'",<.>/?
– Must contain at least two types of the following characters:
▪
Uppercase letters
▪
Lowercase letters
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the RH2288H V3
Figure 5-16.
9.2 Logging In to
137