Installing An Sd Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-129 Removing an SD card
Step 11 Remove the SD card. See (2) in
Step 12 Place the removed SD card in an ESD bag.
----End

7.52 Installing an SD Card

Install an SD card if an SD card has failed or needs to be replaced with a new
model.
Install SD cards based on actual situation. Back up important data on the SD card
before replacing it.
●
●
●
●
Issue 46 (2022-12-28)
If the server is not installed with SD cards, install SD cards when the server is
powered off.
If the server is configured with only one SD card, replace the SD card board
with the spare part (BOM: 02311JDU). If the SD card is installed with the OS,
install the OS on the newly installed SD card.
If the server is configured with two SD cards and only one SD card needs to
be replaced, replace the SD card with the spare part (BOM: 06010304).
If the server is configured with two SD cards and both of them need to be
replaced, replace the SD cards and the SD card board with the spare part
(BOM: 02311JDV). If the original server OS is installed on an SD card, install
the OS on the newly installed SD card.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-129.
7 Replacing Parts
263