Uart2 Ch.n Transmit Data Register; Uart2 Ch.n Receive Data Register; Uart2 Ch.n Status And Interrupt Flag Register - Epson S1C31W74 Technical Manual

UART2 Ch.n Transmit Data Register

Register name Bit
UART2_nTXD 15–8 –
7–0 TXD[7:0]
Bits 15–8 Reserved
Bits 7–0 TXD[7:0]
Data can be written to the transmit data buffer through these bits. Make sure the UART2_nINTF.
TBEIF bit is set to 1 before writing data.

UART2 Ch.n Receive Data Register

Register name Bit
UART2_nRXD 15–8 –
7–0 RXD[7:0]
Bits 15–8 Reserved
Bits 7–0 RXD[7:0]
The receive data buffer can be read through these bits. The receive data buffer consists of a 2-byte
FIFO, and older received data is read first.

UART2 Ch.n Status and Interrupt Flag Register

Register name Bit
UART2_nINTF 15–10 –
9
8
7
6
5
4
3
2
1
0
Bits 15–10 Reserved
Bit 9 RBSY
This bit indicates the receiving status. (See Figure 13.5.3.1.)
1 (R): During receiving
0 (R): Idle
Bit 8 TBSY
This bit indicates the sending status. (See Figure 13.5.2.1.)
1 (R): During sending
0 (R): Idle
Bit 7 Reserved
S1C31W74 TECHNICAL MANUAL
(Rev. 1.1)
Bit name Initial
0x00
0x00
Bit name Initial
0x00
0x00
Bit name Initial
0x00
RBSY 0
TBSY 0
– 0
TENDIF 0
FEIF 0
PEIF 0
OEIF 0
RB2FIF 0
RB1FIF 0
TBEIF 1
Seiko Epson Corporation
Reset R/W
– R –
H0 R/W
Reset R/W
– R –
H0 R
Reset R/W
– R –
H0/S0 R
H0/S0 R
– R
H0/S0 R/W Cleared by writing 1.
H0/S0 R/W Cleared by writing 1 or reading the
UART2_nRXD register.
H0/S0 R/W
H0/S0 R/W Cleared by writing 1.
H0/S0 R Cleared by reading the UART2_nRXD
register.
H0/S0 R
H0/S0 R Cleared by writing to the UART2_
nTXD register.
13 UART (UART2)
Remarks
Remarks
Remarks
13-13