Show Forwardingdb Agetime; Show Mac-Address-Table Multicast - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Forwarding
Database ID
4.4.8.1 no bridge aging-time
This command sets the forwarding database address aging timeout to 300 seconds. In an
IVL system, the
Format
Mode
Forwarding
Database ID

4.4.9 show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the
parameter is required.
all]
Default
Format
Mode
Forwarding DB
ID
Agetime

4.4.10 show mac-address-table multicast

This command displays the Multicast Forwarding Database (MFDB) information. If you
enter the command with no parameter, the entire table is displayed. You can display the
table entry for one MAC Address by specifying the MAC address as an optional
parameter.
4-18
The forwarding database ID (
warding database's aging timeout is being configured. Use
the option to configure the agetime of all forwarding
all
databases.
parameter is required.
[fdbid | all]
no bridge aging-time [fdbid | all]
Global Config
Fdbid (Forwarding database ID) indicates which forwarding
database's aging timeout is being configured. All is used to
configure all forwarding database's agetime.
all
show forwardingdb agetime [fdbid | all]
Privileged EXEC
Forwarding database ID indicates the forwarding database
whose aging timeout is to be shown. The all option is used to
display the aging timeouts associated with all forwarding
databases.
In an IVL system, this parameter displays the address aging
timeout for the associated forwarding database.
v1.0, March 2006
) indicates which for-
fdbid
Port and System Setup Commands
[fdbid |