Using The "No" Form Of A Command; Command Modes - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
The port identifies the specific physical port or logical interface being managed on a given
slot.
Table 2-4. Type of Ports
Port Type
Physical Ports
Logical Interfaces
CPU ports

2.2.4 Using the "No" Form of a Command

The keyword is a specific form of an existing command and does not represent a new
no
or distinct command. Almost every configuration command has a
the form to reverse the action of a command or reset a value back to the default. For
no
example, the
no shutdown
Use the command without the keyword
feature that is disabled by default.
Only the configuration commands are available in the

2.2.5 Command Modes

The CLI groups commands into modes according to the command function. Each of the
command modes supports specific 7200 Series Managed Switch software commands. The
commands in one mode are not available until you switch to that particular mode, with the
exception of the User EXEC mode commands. You can execute the User EXEC mode
commands in the Privileged EXEC mode.
Overview
Description
The physical ports for each slot are numbered sequentially starting
from zero.
Port-channel or Link Aggregation Group (LAG) interfaces are
logical interfaces that are only used for bridging functions.
VLAN routing interfaces are only used for routing functions.
CPU ports are handled by the driver as one or more physical
entities located on physical slots.
configuration command reverses the shutdown of an interface.
to re-enable a disabled feature or to enable a
no
v1.0, March 2006
form. In general, use
no
form.
no
2-5