Clear Port-Channel; Port-Channel Staticcapability; Port Lacpmode - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Mode
12.1.4.1 no port-channel
This command deletes a port-channel (LAG).
Format
Mode

12.1.5 clear port-channel

Use this command to clear all configured port channels.
Format
Mode

12.1.6 port-channel staticcapability

This command enables the support of port-channels (static link aggregations) on the
device. By default, the static capability for all port-channels is disabled.
Default
Format
Mode
12.1.6.1 no port-channel staticcapability
This command disables the support of static port-channels on the device.
Format
Mode

12.1.7 port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format
Mode
12.1.7.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Port-Channel/LAG (802.3ad) Commands
Global Config
no port-channel {<logical slot/port> | all}
Global Config
clear port-channel
Privileged EXEC
disabled
port-channel staticcapability
Global Config
no port-channel staticcapability
Global Config
enabled
port lacpmode
Interface Config
v1.0, March 2006
12-3