Port-Channel Linktrap; Port-Channel Show Commands; Show Port-Channel Brief - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

12.1.11 port-channel linktrap

This command enables link trap notifications for the port-channel (LAG). The interface is
a logical slot/port for a configured port-channel. The option
port-channel with the same administrative mode setting.
Default
Format
Mode
12.1.11.1 no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is
a logical slot and port for a configured port-channel. The option
port-channel with the same administrative mode setting.
Format
Mode

12.2 Port-Channel Show Commands

This section describes the commands you use to view port-channel status and
configuration information.

12.2.1 show port-channel brief

This command displays the static capability of all port-channels (LAGs) on the device as
well as a summary of individual port-channels.
Format
Modes
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
Port-Channel/LAG (802.3ad) Commands
enabled
port-channel linktrap {<logical slot/port> | all}
Global Config
no port-channel linktrap {<logical slot/port> |
all}
Global Config
show port-channel brief
Privileged EXEC
User EXEC
This field displays whether or not the device has static capa-
bility enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-chan-
nel, in notation.
<slot/port>
v1.0, March 2006
sets every configured
all
sets every configured
all
12-5