Bootpdhcprelay Cidoptmode; Bootpdhcprelay Enable; Bootpdhcprelay Maxhopcount - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

7.4.1 bootpdhcprelay cidoptmode

This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
Default
Format
Mode
7.4.1.1 no bootpdhcprelay cidoptmode
This command disables the circuit ID option mode for BootP/DHCP Relay on the system.
Format
Mode

7.4.2 bootpdhcprelay enable

This command enables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Default
Format
Mode
7.4.2.1 no bootpdhcprelay enable
This command disables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Format
Mode

7.4.3 bootpdhcprelay maxhopcount

This command configures the maximum allowable relay agent hops for BootP/DHCP
Relay on the system. The
Default
Format
Mode
DHCP Commands
disabled
bootpdhcprelay cidoptmode
Global Config
no bootpdhcprelay cidoptmode
Global Config
disabled
bootpdhcprelay enable
Global Config
no bootpdhcprelay enable
Global Config
parameter has a range of 1 to 16.
<hops>
4
bootpdhcprelay maxhopcount <1-16>
Global Config
v1.0, March 2006
7-15