NETGEAR ProSafe GSM7212 Cli Reference Manual page 170

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Secret
Configured
If you include the optional
configured RADIUS accounting server are displayed. The IP address parameter must
match that of a previously configured RADIUS accounting server. The following
information regarding the statistics of the RADIUS accounting server is displayed.
Accounting
Server IP
Address
Round Trip Time
Requests
Retransmission
Responses
Malformed
Responses
Bad
Authenticators
Pending
Requests
Timeouts
Unknown Types
11-18
Yes or No.
[statistics <ipaddr>]
IP Address of the configured RADIUS accounting server
The time interval, in hundredths of a second, between the
most recent Accounting-Response and the Accounting-
Request that matched it from the RADIUS accounting server.
The number of RADIUS Accounting-Request packets sent to
this accounting server. This number does not include retrans-
missions.
The number of RADIUS Accounting-Request packets
retransmitted to this RADIUS accounting server.
The number of RADIUS packets received on the accounting
port from this server.
The number of malformed RADIUS Accounting-Response
packets received from this server. Malformed packets include
packets with an invalid length. Bad authenticators and
unknown types are not included as malformed accounting
responses.
The number of RADIUS Accounting-Response packets con-
taining invalid authenticators received from this accounting
server.
The number of RADIUS Accounting-Request packets sent to
this server that have not yet timed out or received a response.
The number of accounting timeouts to this server.
The number of RADIUS packets of unknown types, which
were received from this server on the accounting port.
Port-Based Access and Authentication Commands
v1.0, March 2006
parameter, the statistics for the