Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
14.1.2.1 no classofservice ip-precedence-mapping
This command maps an IP precedence value to a default internal traffic class value
Format
Modes
14.1.3 classofservice ip-dscp-mapping
This command maps an IP DSCP value to an internal traffic class. The
specified as either an integer from 0 to 63, or symbolically through one of the following
keywords:
af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4,
.
cs5, cs6, cs7, ef
The
<trafficclass>
Format
Mode
14.1.3.1 no classofservice ip-dscp-mapping
This command maps an IP DSCP value to a default internal traffic class value.
Format
Mode
14.1.4 classofservice trust
This command sets the class of service trust mode of an interface. You can set the mode to
trust one of the Dot1p (802.1p), IP DSCP, or IP Precedence packet markings.
Format
Mode
14.1.4.1 no classofservice trust
This command sets the interface mode to untrusted.
Format
Modes
Quality of Service (QoS) Commands
no classofservice ip-precedence-mapping
Global Config
Interface Config
range is from 0-7.
classofservice ip-dscp-mapping <ipdscp> <traffic-
class>
Global Config
no classofservice ip-dscp-mapping
Global Config
classofservice trust <dot1p | ip-dscp | ip-prece-
dence>
Global Config
Interface Config
no classofservice trust
Global Config
Interface Config
v1.0, March 2006
value is
<ipdscp>
14-3