This section describes the Quality of Service (QoS) commands available in the 7200
Series Managed Switch CLI.
This section contains the following topics:
•
Section 14.1 "Class of Service (CoS) Commands (GSM7248 only)" on page 14-2
•
Section 14.2 "Differentiated Services (DiffServ) Commands" on page 14-7
•
Section 14.3 "DiffServ Class Commands (GSM7248 only)" on page 14-9
•
Section 14.4 "DiffServ Policy Commands (GSM7248 only)" on page 14-15
•
Section 14.5 "DiffServ Service Commands (GSM7248 only)" on page 14-19
•
Section 14.6 "DiffServ Show Commands" on page 14-21
•
Section 14.7 "MAC Access Control List (ACL) Commands (GSM7248 only)" on
page 14-27
•
Section 14.8 "IP Access Control List (ACL) Commands (GSM7248 only)" on
page 14-32
The commands in this section are in one of two functional groups:
•
Configuration Commands are used to configure features and options of the switch. For
every configuration command there is a show command that will display the
configuration setting.
•
Show commands are used to display device settings, statistics and other information.
Quality of Service (QoS) Commands
Quality of Service (QoS) Commands
v1.0, March 2006
Chapter 14
14-1