Drop; Conform-Color; Class - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

14.4.2 drop

This command specifies that all packets for the associated traffic stream are to be dropped
at ingress.
Format
Mode
Incompatibilities Assign Queue, Mark (all forms), Police

14.4.3 conform-color

This command is used to enable color-aware traffic policing and define the conform-color
class map. Used in conjunction with the police command where the fields for the conform
level are specified. The
class map.
Note: This command may only be used after specifying a police command for the
Format
Mode

14.4.4 class

This command creates an instance of a class definition within the specified policy for the
purpose of defining treatment of the traffic class through subsequent policy attribute
statements. The
Note: This command causes the specified policy to create a reference to the class
Note: The CLI mode is changed to Policy-Class-Map Config when this command
Format
Mode
14-16
drop
Policy-Class-Map Config
<class-map-name>
policy-class instance.
conform-color <class-map-name>
Policy-Class-Map Config
is the name of an existing DiffServ class.
<classname>
definition.
is successfully executed.
class <classname>
Policy-Map Config
v1.0, March 2006
parameter is the name of an existing Diffserv
Quality of Service (QoS) Commands