Show Interface - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Machine Model
Serial Number
FRU Number
Part Number
Maintenance
Level
Manufacturer
Burned in MAC
Address
Software Version
Operating
System
Network
Processing
Device
Additional
Packages

15.1.4 show interface

This command displays a summary of statistics for a specific interface or a count of all
CPU traffic based upon the argument.
Format
Mode
Note: For information about the format and output for
The display parameters, when the argument is
System Maintenance Commands
Specifies the machine model as defined by the Vital Product
Data.
The unique box serial number for this switch.
The field replaceable unit number.
Manufacturing part number.
Indicates hardware changes that are significant to software.
Manufacturer descriptor field.
Universally assigned network address.
The release.version.revision number of the code currently
running on the switch.
The operating system currently running on the switch.
The type of the processor microcode.
This displays the additional packages incorporated into this
system.
show interface {<slot/port> | switchport | ether-
net}
Privileged EXEC
, see Section 15.1.5 "show interface ethernet" on page
ethernet
v1.0, March 2006
show interface
, is as follows:
<slot/port>
15-5.
15-3