Disconnect - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
SNMPv3
Authentication
SNMPv3
Encryption

3.6.8 disconnect

This command closes a telnet session.
Format
Mode
3-22
retrieve parameters on the system. If the value is set to
the SNMPv3 user is only able to retrieve parameter
dOnly,
information. The SNMPv3 access mode may be different
than the CLI and Web access mode.
This field displays the authentication protocol to be used for
the specified login user.
This field displays the encryption protocol to be used for the
specified login user.
disconnect {<sessionID> | all}
Privileged EXEC
v1.0, March 2006
Administrative Access Commands
Rea-