Vlan Port Acceptframe All; Vlan Port Pvid All - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
auto

6.1.10 vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces. The modes defined as
follows:
• VLAN Only mode - Untagged frames or priority frames received on this interface are
discarded.
• Admit All mode - Untagged frames or priority frames received on this interface are
accepted and assigned the value of the interface VLAN ID for this port.
With either option, VLAN tagged frames are forwarded in accordance with the IEEE
802.1Q VLAN Specification.
Default
Format
Mode
6.1.10.1 no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit
All mode, untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
Mode

6.1.11 vlan port pvid all

This command changes the VLAN ID for all interface.
Default
Format
Mode
6.1.11.1 no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
VLAN Commands
The interface is dynamically registered in this VLAN by
GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent
to registration normal.
all
vlan port acceptframe all {vlanonly | all}
Global Config
no vlan port acceptframe all
Global Config
1
vlan port pvid all <1-4094>
Global Config
v1.0, March 2006
6-5