Activate Marriage; Connect The Projector To Network-Attached Storage - Christie IMB User Manual

Integrated media block
Table of Contents

Advertisement

14. Activate marriage. See
When the Christie IMB is operating correctly, a green LED icon appears in the task bar of the
projector touch panel controller (TPC) and Christie IMB is added to the TPC menu.
If the Christie IMB LED is red, tap Menu > Christie IMB > System > Status to identify and
correct the issue. If the IMB LED does not appear in the menu bar, repeat the installation and
configuration procedure.

Activate Marriage

You must complete the Marriage wizard to display secure content. Marriage permissions are required
to complete marriage and only Christie accredited technicians are authorized to activate projector
marriage.
1. Tap Menu > Service Setup > IMB Marriage.
2. Complete the Marriage wizard.
3. Tap Finish.
4. Log out of the account with marriage permissions or restart the projector.
Connect the Projector to Network-attached
Storage
If the NFS settings of the NAS device are incorrect, the device cannot share files with the Christie
IMB. To reduce the risk of NAS file sharing issues:
Configure the NAS to use a static IP address. The static IP address must be compatible with the
IMB NAS Ethernet port netmask to which the NAS is connected. Using DHCP is not
recommended.
Enable the NFS service on the NAS device. On most NAS devices, this option is disabled by
default.
Enable NFS on the share that the Christie IMB accesses. NFS must be enabled on every shared
NAS share.
Set the NFS access rights for the Christie IMB share to read/write or full rights for everyone.
1. Follow the instructions provided by the manufacturer of your NAS to ensure it is set up and
operating correctly. To view installation instructions for common NAS hardware, see
Storage Devices
2. Connect one end of an Ethernet cable to the NAS-A or NAS-B ports on the IMB and the other end
to your NAS device or network.
3. Tap Menu > Christie IMB > System.
4. Tap IMB Network.
5. Enter the settings for your network in the NAS 1 or NAS 2 areas.
6. Tap Save.
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)
Activate Marriage
on page 15.
Hardware Installation and Setup
on page 7.
Manage
7

Advertisement

Table of Contents
loading

Table of Contents