Christie IMB User Manual page 109

Problem
I cannot complete IMB marriage
How are macros, input cues, and global
triggers different?
How I do I install and configure dual
projectors?
Why do I receive a communication error
when I start the projector?
Why is the Christie IMB option not
appearing in the touch panel controller
menu?
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)
Verify:
• The marriage ring is locked.
• The security door is on and it is locked.
• Christie is selected in the IMB Installed list. Tap Menu >
Administrator Setup > Content Devices Configuration.
Unload all content:
1. Tap Menu > Christie IMB > Control.
2. Tap the Unlock icon.
3. Tap Unload Content.
See Manage Automation
See Configure Multiple Projectors
You do not need to change any settings on the slave projector to
enable dual projector playback. If you cannot display content:
• Remove all 90 degree adapters from the BNC synchronization
cable.
• Make sure you have ingested identical content into both projectors
and each projector has a valid KDM key.
When the Christie IMB first starts, it runs diagnostic tests on all
components. This diagnostic process can delay communication with
the Christie IMB. Restart the Christie IMB if communication is not
available after two minutes. If a restart fails to restore
communication, contact support. See the back cover of this
document for contact information for your region.
The Christie IMB plug-in has not been downloaded or the projector
has not been restarted after the download. The Christie IMB plug-in
is downloaded automatically when you install the Christie IMB.
However, it can take several minutes to complete. Restart the
projector when the Christie IMB plug-in is downloaded and the
Christie IMB Plug-in Updated - Reboot? dialog appears.
Troubleshooting
Resolution
on page 37.
on page 8.
97