Christie IMB User Manual page 31

2. On the projector TPC, tap Menu > Christie IMB > System.
3. Tap IMB Network.
4. In the NAS 1 area, select Static IP and then complete these fields:
a. Enter 192.168.1.1 in the IP Address field.
b. Enter 255.255.255.0 in the Netmask field.
Unless it is required for your installation, leave the Gateway field blank.
5. Select DHCP in the NAS 2 area.
The IP address for port 2 must not be on the same subnet as port 1. In this example, it
cannot start with 192.168.1.x
6. Tap Save.
7. Tap the Storage tab.
8. Tap Add NAS.
9. Tap Primary.
10. Tap Yes.
11. Complete these fields:
a. Enter QNAP NAS in the Label field.
b. Enter 192.168.1.100 in the IP Address field.
c. Enter admin in the User field.
d. Enter admin in the Password field.
e. Select NFS in the File System list.
f. Tap Refresh Share Names to update the Share list.
g. Select /Content in the Share list.
12. Tap Test Connectivity.
13. Tap OK.
14. Tap Save.
15. Tap OK.
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)
Manage Storage Devices
19