Connect To A Content Network - Christie IMB User Manual

Manage Storage Devices
5. Select DHCP in the NAS 2 area.
The IP address for port 2 must not be on the same subnet as port 1.
6. Tap Save.
7. Tap the Storage tab.
8. Tap Add NAS.
9. Tap Primary.
10. Tap Yes.
11. Complete these fields:
a. Enter Iomega NAS in the Label field.
b. Enter the IP address of the Iomega device in the IP Address field.
c. Enter admin in the User field.
d. Enter admin in the Password field.
e. Select NFS in the File System list.
f. Tap Refresh Share Names to update the Share list.
g. Select /Content in the Share list.
12. Tap Test Connectivity.
13. Tap OK.
14. Tap Save.
15. Tap OK.

Connect to a Content Network

With a content network, you can ingest content from a theatre management system (TMS), a
satellite receiver, or another IMB. The NFS service must be enabled on the file share accessed by the
Christie IMB.
Due to the bandwidth limitations of the PIB Ethernet port, connect your content network to an
unused NAS port on the Christie IMB.
To allow the projector to communicate with the ingest device, see
IP address of the theatre management system or satellite receiver in the IP Address field and select
the NFS share in the Share list.
24
Add a NAS on page 16. Specify the
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)