Content Management
When playing content, you must select the correct channel for the content. For example, you select a
3D channel to play 3D content. In addition, different content standards require unique channel
settings to play correctly:
•
Data Format
•
Select 4:4:4 (RGB) in the Data Format list on the Config 1 Channel Setup screen (Tap
Menu > Channel Setup).
•
Scan Type
•
Select Progressive in the Scan Type list on the Config 2 Channel Setup screen (Tap
Menu > Channel Setup > Config 2).
•
3D Sync Input Mode
•
To play high frame rate (HFR) 3D content you must create 3D channels with settings that
meet the requirements of your 3D equipment. Select Line Interleave in the 3D Sync
Input Mode list on the 3D Control Channel Setup screen (Tap Menu > Channel Setup >
3D Control).
You can create 3D files to support seamless switching between standard and HFR content. For
additional information about channels and channel set up, see the projector user manual.
Load Content
Before you can select content or a play list for playback, you must load it.
1. Tap Menu > Christie IMB > Control.
2. Tap the Unlock icon.
3. Tap Load Content.
4. Tap the Play Lists tab to load a play list.
- or -
Tap the Content tab to load an individual file.
5. Tap a play list or an individual file. To create a play list, see
6. Tap Accept.
7. Use the playback controls to start and stop playback. See
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)
Create a Play List
on page 69.
Control Content Playback
on page 30.
29