Add A Nas; Connect To A Qnap Nas - Christie IMB User Manual

Manage Storage Devices

Add a NAS

Your network-attached storage (NAS) device must be configured to use the Network File System
(NFS) protocol. Christie recommends that you use a static IP address for the NAS device.
1. Verify the NAS device is connected to one of the gigabit Ethernet ports on the Christie IMB
labeled NAS-A or NAS-B.
2. Tap Menu > Christie IMB > System.
3. Tap Storage.
4. Tap Add NAS.
5. Tap Primary if this is your primary NAS device.
6. Tap Yes.
7. Complete the information fields for the NAS device.
8. Tap Refresh Share Names.
9. Select a share in the Share list.
10. Tap OK.
11. Tap Save.
12. Tap OK.

Connect to a QNAP NAS

This section provides detailed instructions for connecting a QNAP TS-559 Pro+ to a Christie IMB. The
instructions should be applicable to other QNAP NAS devices.
The IP addresses and folder names used in this document are provided as examples. Use IP
addresses and share names that are unique to your theater environment.
Complete the procedures in the order they are written.
Prerequisites
To connect a QNAP NAS to a Christie IMB, install and format the NAS hard drives and verify that they
are configured for RAID 5. For more information about installation and setup, see
docs.qnap.com/nas/en/index.html.
16
http://
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)